20 PCS O-Ring Kit for Saeco Philips Gaggia Coffee Machines

Your Saeco, Philips, or Gaggia espresso machine is leaking. Water around the group head, steam escaping from a fitting, pressure dropping mid-shot — nine times out of ten, it's a worn O-ring. This 20-piece kit covers the most common failure points across the Saeco/Philips/Gaggia machine family.

These machines are built to last 10–15 years. When they start leaking, people throw them away. That's a mistake. A $12 O-ring kit can add years of life to a machine that originally cost $300–$800.

What's in the kit

• 20× food-grade silicone O-rings in mixed sizes covering standard Saeco/Philips/Gaggia dimensions
• Sizes address: group head seal / brew unit O-rings, boiler connector O-rings, steam wand fitting seals, water connector seals

Compatible machines

Saeco: Xelsis, Intelia, GranBaristo, Syntia, PicoBaristo, Incanto, Minuto, Royal, Magic, Vienna, Talea, and most current Saeco superautomatic models.

Philips: 2200, 3200, 4300, 5000, and 5400 series fully automatic espresso machines (EP2000–EP5400 range).

Gaggia: Classic, Classic Pro, Brera, Unica, Accademia, and similar models.

Tip: replace all seals while you're in there

O-ring sizing can vary even within the same model line. We recommend replacing all accessible seals when you open the machine — it's easier than tracking down which one failed, and seals that share the same age all wear at similar rates. One kit is usually enough for a full seal refresh.

No special tools needed beyond a small flathead screwdriver for the group head. If your machine is leaking and still heats up, there's a very good chance this is the only repair it needs.